PERLITE HEAT INSULATION PLASTER
Definition
It is a cement-based and perlite plaster mortar that provides heat and sound insulation that can be applied manually or by machine.
TECHNICAL SPECIFICATIONS:
Color White
Dry Unit Heap Weight 400 ± 50 kg/m3
Flexural Strength > 0,5 Mpa
Thermal Conductivity T1
Water Vapor Permeability ≤ 15
Compressive Strength CSII
Bond Strength ≥ 0,2 N/mm2
Capillary Water Absorption W1
Reaction to Fire Class A1
Mixing Process 5 minutes mixing-3 minutes resting-2 minutes mixing
Pot Life 2 Hours
Working Time 20 minutes
Drying Time 4 – 6 day
Application Thickness 10 mm – 30 mm
Time to Wait for the Application to be Made min. 2 days (this period may be longer depending on weather conditions).
* The values stated above are valid for + 23oC and 50% relative humidity. The time becomes shorter at high temperatures and longer at low temperatures.
USAGE AREAS:
On interior and exterior facades; brick, concrete, briquette, aerated concrete, etc. It is used as an insulation plaster on surfaces.
It contributes to sound and heat insulation on the applied surfaces.
ADVANTAGES:
- High thermal insulation (T1) and sound insulation
- A1 class incombustibility
- 2-3 times lighter than conventional plasters
- Its lightness helps buildings to be earthquake resistant.
- Practical and fast application opportunity
- Suitable for hand and machine applications
USAGE INSTRUCTIONS:
The application surface must be clean, free from dust and oil, solid and moist. Before application
The surface must be moistened, and saturated with water in very hot and windy weather. Crack before application
and the holes must be repaired. The surface should be smooth. Glossy surfaces such as exposed concrete and water
Highly absorbent surfaces should be primed with PRIMER at least 24 hours before application.
An average of 9-10.5 liters of water is added to a 13 kg bag of Insulated Filler Plaster and in the plaster machine
should be mixed and the prepared mortar should be applied by spraying. Considering the specified water rates; of water
should not be added all at once, but should be adjusted according to the consistency of the mortar. In manual applications, the mixture is low
It should be done in accordance with the mixing times specified with a rotating mixer, applied to the surface with a steel trowel.
must be mastered. Application thickness should be between 10 mm and 30 mm in one coat. Second floor first floor
It is applied with a maximum thickness of 30 mm after hardening (at least 2 days later). When it is hard enough
depending on the glaze. One day after the application, the surface should be at least 3 days depending on the climatic conditions.
It is watered twice in the shade, in the morning and in the evening.
No foreign material should be added into the mortar, each bag should be used as a whole and the specified water
should be paid to the proportions. It should not be used by mixing with products that have expired. Different material
Plaster mesh should be used at the joints and points where movement is thought to be possible. Application
All tools used afterwards should be washed with water before they dry. Times stated at 20 ° C substrate and ambient
temperature, the time extends at low temperatures and decreases at high temperatures. Given in the Technical Data Sheet
application conditions must be followed. Otherwise, the final product performance of the product depends on the application methods and
may be affected by environmental conditions.
It should not be applied below + 5oC and above 35oC. Application in very humid and / or very hot weather
should be avoided. Avoid application under strong wind and direct sunlight.
It should not be applied on surfaces that are frozen, melting or have the risk of frost within 24 hours.
PACKING:
It is prepared in a kraft bag of 13 kg, in shrink wrapped pallets.
CONSUMPTION:
4 - 4.5 kg / m2 for 1 cm plaster thickness
APPLICATION TOOLS:
Plaster machine, low speed mixer, gauge, steel trowel.
APPLICATION LIMIT ;
It should not be applied directly on metal, wood or wooden surfaces. It is not applied on plaster surfaces. Old
painted surface, ready-made colored plaster, siding, old plastered not intact, constantly exposed to moisture
It is not applied on asbestos cement or insulation panel surfaces that may remain.
STORAGE AND SHELF LIFE:
It should be stored in its unopened original package in a cool and dry environment. Under direct sunlight
should not be left. Shelf life is 1 year from the date of manufacture.
SECURITY PRECAUTIONS:
Work and worker health clothing, protective gloves, goggles and masks should be used during the application.
Due to the irritating effects of cured material, in case of contact with skin and eyes, immediately use plenty of water and
should be washed with soap. If swallowed, seek medical advice immediately. Food and
beverage ingredients should not be inserted. It should be stored in places out of the reach of children
S22: Do not breathe dust. 
S26: In case of contact with eyes, rinse immediately with water and seek medical advice.
S29: Do not empty into drains.
S24 / 25: Avoid contact with eyes and skin.
S37 / 39: Wear suitable protective gloves, goggles / mask.
S46: If swallowed, seek medical advice immediately. Show container or label
Risk Phrases:
R7 / 8: Irritating to respiratory system and skin.
R41: Risk of serious damage to eyes.
R43: May cause sensitization by skin contact.
RESPONSIBILITY
Use of the product for misuse or technical application conditions and recommendations stated above
Our company is not responsible for application errors that may occur in case of non-compliance. This technique is
The data contains the information on the date they were written. The manufacturer reserves the right to change them.
amount.
